Parts specified below (tires, wheels, and suspension) must be used. All components and parts (e.g., hardware) are required to be installed per manufacturer instructions. Original equipment (OE) or equivalent components are not allowed.

1. Anti-roll (sway) bar end links may be substituted but may serve no other purpose

2. Tires: Goodyear F1 Supercar 3 (220 Treadwear), size: 275/40R18

3. Wheels

A. Diameter and width (in.): 18x9.5

B. Offset, including wheel spacer (mm): +35 (35ET or ET35) or greater

C. Weight, without spacer if used, minimum (lbs.): 17, including:

1. Wheel weights

2. TPMS sensor if installed

3. Tire valve stem (type unrestricted)

D. Wheel spacers are allowed provided the resultant combination with the wheel complies with the offset requirements

4. Suspension

A. Sealed KONI Sport Strut, Front, Part# TBA

B. Sealed KONI Sport Strut, Rear, Part# TBA

C. Eibach Pro-Kit Lowering Springs- Part# 35101.140

D. Choice of:

1. Strano Performance Parts kit Part# SpecS197-1. Includes bars, bushings, collar locks, Billet aluminum rear mounts

2. Strano Performance Parts kit Part# SpecS197-2. Same as above, adding front sway bar mount reinforcements + Billet Front sway bar brackets

3. Eibach Mustang Anti-Roll Bar Kit- Part# 35101.320

E. Maximum Motorsports Caster Camber Plates- Part# MM5CC-1