A. All drivers shall utilize either a 5-, 6- or 7-point restraint harness.

B. The following harness requirements must be met:

1. Shoulder straps shall be separate.

2. Two inch shoulder straps shall only be used with head and neck devices.

3. All harnesses shall bear labels bearing either of the following SFI or FIA certifications:

a. SFI specification 16.1 or 16.

b. FIA specification 8853/1985 including amendment 1/92 or FIA specifications 8853/98 and 8854/98.

4. Harnesses shall be in good condition (no cuts, abrasions, abnormal wear, etc.). It is highly recommended that harnesses are not utilized past their expiration date.

5. The following steps shall be taken when threading harness through a harness bar

a. Figure 1

b. Figure 2

c. Figure 3

d. Figure 4

e. Figure 5

f. Figure 6