Sport Category Electrical - Full Rules
1. The make of spark plugs, points, ignition coil and high-tension wires is unrestricted including spark plug wires having an in-line capacitor. Substitution or addition of ignition coil mounting brackets is permitted, provided they affix to the original standard location and serve no other purpose. (Modification of the distributor cap for the purpose of installing allowed non-standard components is not permitted.)
2. On cars made prior to January 1, 1968, any ignition system using a standard distributor without modification may be used.
3. Ignition settings may not be mechanically adjusted outside factory specifications.
4. Additional battery hold-down hardware may be added to supplement the standard equipment in order to meet safety inspection requirements. It may serve no other purpose.
5. Tire pressure monitoring systems (TPMS) may be disabled. Altering the signal to the TPMS is permitted.
6. On cars without the ability to turn off anti-lock braking systems (ABS), electronic stability control and/or traction control (ESC/TC) from the manufacturer, modifications to defeat the ABS/ESC/TC are permitted. These modifications are limited to altering the inputs to the ABS/ESC/TC processor (e.g., removing fuses, unplugging yaw or steering angle sensors, altering signals, etc.) and may serve no other purpose. Any codes or error lights resulting from ABS/ESC/TC modifications are permitted.
7. On cars equipped with computer-aided gear selection or “skip-shift” features from the manufacturer, modifications to defeat the skip-shift feature are permitted any may serve no other purpose.
8. On cars with electronically-controlled exhaust pipe valving downstream of the catalytic converter, devices may be added to satisfy the PCM/ECU provided the OE component is still installed. Such devices shall perform no other function.
9. The addition of electrical grounding cables and associated distribution blocks/terminals is permitted. Holes may be drilled for mounting only. This does not permit the use of electrical enhancement components such as condensers, voltage controllers, etc.
