The following items are guidelines for general repair and modifications in Sport and Tuner Categories:

A. Other than when necessary for safety enhancements, an authorized addition, modification, substitution or removal may not perform a prohibited function nor does it permit the addition, modification, substitution or removal of any other component unless it is specifically authorized.

B. Any part which becomes partially or completely detached during on-track sessions must be fixed and inspected by officials before that vehicle can return to the track. If the part is an aerodynamic addition, the part shall be completely removed for the remainder of the competition.

C. Parts (other than brakes and fluids) are not permitted to be replaced or changed after the car has passed tech inspection unless an Event Official has determined the part to be unsafe or broken badly enough that not changing it would keep the participant from the event.

D. Expendable replacement parts (e.g., bearings, seals, gaskets, filters, belts, bolts, bulbs, batteries, clutch discs, pressure plates, suspension bushings, drivetrain mounts, fenders, trim pieces, fuel filler caps, electrical sensors, etc.) may be used provided they are essentially identical to the standard parts (e.g., have the same type, size, hardness, weight, material, specifications, etc.), are used in the same location, and provide no performance benefit. These allowances are strictly to allow components to be replaced from alternate sources other than the original manufacturer. They should not be construed as an allowance to replace components with those which could be considered a “higher performance” alternative.

E. Any repairs must comply with factory-authorized methods and procedures, or industry standard methods, as follows: If the OE does not provide an appropriate method of repair, industry standard methods and procedures may be used. Such repairs may not result in a part or combination of parts that provides a competitive advantage (e.g., significant change to weight, suspension control, power, etc.) as compared to the standard part(s). Competitors are strongly cautioned to use this allowance to make common-sense repairs only. It is not permitted to use non-compliant parts even if they have been set to OE specifications.

F. Items which do not require the modification or replacement of existing parts and do not increase the peak performance of the vehicle are permitted. (E.g., a turbo or alternator blanket.)

G. Except for authorized modifications, other modifications or equipment will place the car in higher levels as appropriate. Configurations involving damaged parts (e.g., blown fuses) are not typically authorized by the manufacturer and hence are not allowed.

H. Vehicles may be street-driven cars, and SCCA does not encourage or condone the breaking of laws governing pollution control systems or the alteration of street-driven vehicles contrary to state and Federal laws regarding their use. It continues to be the responsibility of the individual to comply with such state and federal laws.