The following external engine components may be changed or replaced, with the listed restrictions:

1. Any accessory pulleys and belts of the same type (e.g., V-belt, serpentine) as standard may be used. This allowance applies to accessory pulleys only (e.g., alternator, water pump, power steering pump and crankshaft drive pulleys). It does not allow replacement, modification, or substitution of pulleys, cogs, gears or belts which are part of cam, layshaft, or ignition drive or timing systems, etc. Any crankshaft damper or pulley may be used. SFI-rated dampers are recommended. Supercharged cars may not change the effective diameter of any pulley which drives the supercharger.

2. Any engine mount is allowed provided it attaches only to the original mounting points, does not relocate the engine (other than incidental to changes in compliance material), and weighs no less than the OE mount. The amount of metal in a replacement bushing may not be increased relative to the amount of metal found in a standard bushing for the particular application. Solid metal bushings are specifically prohibited. All components between the engine and the mounting structure are considered to be part of the mount assembly.